GearChic

April 24, 2022

updates

Updates: Broken Bones and Saying Goodbye.....

GearChic

April 24, 2022

updates

RevZilla Denver Grand Opening with some of the best people I’ve ever worked with in the motorcycle industry. October 2021

UPDATE #1: IT’S SO HARD TO SAY GOODBYE, REVZILLA

Well, it’s been a wild couple of months.

First things first, after 8 years of dedicating my career to RevZilla / Comoto, I decided to leave at the end of February. For reasons I won’t go into deeply here, I had to make a decision for myself that was extremely difficult to make. But I am 1,000% happy that I did.

A very, very wise woman I know recently said:

Just don’t drain your well filling everyone else’s glass. Your well being is important too.

I poured my heart & soul into the RevZilla brand but after 8 years, I needed to do this to regain my mental health and passion for this industry. I appreciate everyone’s support and love over the years and have not lost my love of two wheels. And in case you’re wondering, yes, staying in Denver for the time being and hoping to enjoy the mountains around here very soon.

So after I decided to leave, I flew home to visit my family in CA for some down time including riding on two wheels. First, I went for a lovely day ride through Marin County, just north of the Golden Gate Bridge with my wonderful friend, Kurt of Transformative Journeys.

On my friend’s Royal Enfield Classic. Such a lovely bike.

He led me on a beautiful ride through Muir Woods, around Mount Tamalpais and up to Point Reyes Station. It was a gorgeous day and a really wonderful re introduction to street riding after taking all of Winter off. As a shorty, the RE is an easy, classic bike to ride. Of course, you may not flat foot if you’re short like me but as you move up your way from 250-300cc bike, this 650cc twin is an easy upgrade. Remember, us shorties must put in more time to learn how to ride before we ride our dream bikes.

UPDATE #2: BREAKING THINGS

Later in the week, I decided to go off roading with my friend Joe, and he took me to the beautiful Carnegie SVRA Off Road Park out in Tracy. Well, things didn’t go quite as planned and I bit it going up a hill with some small whoopdies (bumps) that I didn’t see until I was halfway up. I also looked down at the bumps since I wasn’t really expecting them. And then boom, hit the ground and broke my humerus.

The good news is that my dirt gear saved the rest of my body parts and albeit severe, this break was the only injury I walked away with. I decided to have surgery a week and a half later near my parent’s house and then I flew home the end of March. The upside was spending time with my parents and eating everything in sight that my mom was making for me and taking some much needed time off. I highly recommend it.

No worrying, stressing or thinking about my job. I simply wasn’t happy anymore, and I finally got a chance to just relax and be happy.

Even though I was in some pain and recovering from surgery it was much better than the mental stress I was carrying from my job. I truly was able to relax and enjoy some down time.

Recovery is going well, my wound is healing and I’ve started physical therapy.

I’m hoping to have full use of my arm (bearing full weight, lifting, driving, riding, etc.) in month and a half or so.

UPDATE #3: POLARIS EMPOWERSPORTS COUNCIL

All 16 members of the Polaris Empowersports Council, March 2022

When Polaris asked me to join a unique group of individuals in the Powersports industry to increase the visibility, inclusion and participation of riders how could I say no?

https://www.polaris.com/en-us/empowersports-diverse-riding-council/

This group is comprised of talented, passionate and unique riders who come from all over the Powersports industry including snowmobiles, side by sides, offroad and on road motorcycles. I’m excited to volunteer my time to contribute to the efforts that Polaris is making to make our industry a more inclusive one.

I hardly see anyone who looks like me in my industry, as it’s dominated by mostly white, male men. Those numbers changing slowly, but I am thrilled to do what I can to move that needle a bit further, faster. The council was just formed in March so I’m sure there will be exciting events and announcements this year as I’m asked to work on various initiatives set forth by the Council.

Stay Tuned for more Updates!

GearChic

February 20, 2022

dirt / dual sport, videos

See Me Soar, Hear Me Roar

GearChic

February 20, 2022

dirt / dual sport, videos

Last summer I had the privilege of riding with the amazing Pat Jacques of ADVWoman.com, on parts of the Colorado Backcountry Discovery Route. The ride was sponsored in part by WomenRidersNow and SeeMeBeauty.

As part of this trip, I was honored to be chosen as part of a series of short videos that WRN and SMB put together about our journeys. This was one of the most transformative two wheel journeys of my life, having very little offroad riding experience. I feel lucky as ever to have ridden with all of these women and learned so much from my coaches and fellow riders. I hope you enjoy this video as much as I was to be a part of it:

GearChic

February 20, 2022

Helmets

Let's Talk About Helmets

GearChic

February 20, 2022

Helmets

Me and my friend Roko out riding near Nederland, CO. August 2021

This week I worked with a couple of people who needed to get fitted for a helmet. One rider in particular stood out because of her discomfort with wearing a helmet in general, especially a full face. So she asked to see this specific helmet:

This helmet is particularly unique because it can convert from an open face to a modular helmet, so the chinbar can open and then flip backwards to the backside of the helmet. You can wear it this way while riding. Who wouldn’t want the ability to quickly convert from an open to a close? The downside to doing this with traditional modular type helmets is that they are too heavy and cumbersome to ride in at more than parking lot speeds.

The challenge here was that her headshape was a much stronger oval than an intermediate: She was closer to a 4 but that helmet is closer to a 2, almost a 1. You’re probably wondering, how would I know that? Well, if you are also a 4, then a 2 would feel loose side to side but snug front to back. So you’d probably be able to hold the helmet on both sides and turn your head sideways quite a bit inside the helmet.

Helmet fitment is a lot like fitting shoes. Sometimes you have a narrower foot, sometimes a wider foot…and then something in between.

But the even greater problem that she was facing was her aversion to helmets. So even though her perfect fit was actually one of these two which are intermediate ovals that lean towards #1.:

As someone who’s job it is to fit you for a properly fitting helmet, I always have to give you the benefit of the doubt. It’s your head, your comfort and your safety. I pointed out to her why the Bell SRT was the better fitment for her shape. It also has soft, squishy cheekpads and has a forgiving fit all around that doesn’t squeeze too hard in all the wrong places. (I didn’t have her try on the Shoei because it was well above her pricepoint, and she was already feeling uncomfortable with the process as it was) so she could compare the fit to the Shark.)

Although she recognized the Bell to be a better fitment, I encouraged her to try the Shark (at home first, for about 30-45 minutes) to see if it would be comfortable enough for longer rides. That way she could return it if she needed to and see how she felt afterwards. The other thing I had to do was size her up to a Medium even though her Bell/Shoei size was a Small. There’s no way you can comfortably wear a rounder (#2) helmet shape if your head leans towards the oval (#5) side.

Of course I want people to wear a perfectly fitted helmet as much as possible, but she was so visibly uncomfortable with the idea of wearing any of these that I didn’t want to turn her off completely from wearing one. She left without either, because unfortunately the greater issue of installing a Sena Headset became more complicated with the way that Shark is designed. It’s virtually impossible to mount any other headset on the side of that helmet. It’s primarily designed to work with their proprietary unit.

The best thing you can do is to first understand your shape per the graphic above and then find a helmet that fits as close to it as possible. The more you wear it, the more you will notice these fit differences and how they contribute to issues such as heaviness, noise and visibility.

Of course, wherever you’re riding I hope you’re wearing a great helmet that works for you.