New Rider Advice, Should I Wear Taller Motorcycle Boots?

A new rider from Kuala Lumpur wrote me awhile back about whether or not she should wear tall, 3" boots. She rides a brand that we don't really get here, a Benelli Keeway RKV 200. It weighs less than 300lbs and has a ~30" seat height. A little taller than other beginner bikes, but certainly not impossible. She's 5'2" and my guess is she has a ~26-27" inseam. She says:

"I'm okay with riding really slowly, until gear 2, but my shortness is really killing it for me. Especially when i have to backup. Plus, i'm awful at even maneuvering the bike even when i'm off it.. lol! I guess i'm not that good at faking it when it comes to how heavy the bike is. Well, just wanted a word of advise from you and do you think wearing 3 inch high boots will help?"

First off, I have to ask if you've had any basic rider training? If not, I hope that you have some local resources to take a basic class. Being a shorter person, I have learned that your skills and riding techniques compensate very well for lack of height. Otherwise, I'd never would've been able to ride any of these bikes.

As far as taller boots, they definitely help. I'm not a fan of wearing non protective boots for riding, so ideally I'd suggest buying any of the models in this previous blog post. They will all offer extra traction and the protection you need. But if you don't have access to these or can't afford to order them and have them shipped, then work with what you can get but AVOID high heels/fashion heeled boots. If a chunky heeled boot works, then great. Given where you live, I imagine women's gear choices are really limited.

The other thing I'd highly recommend is learning how to push your bike around while standing next to it. I also wrote a blog post about this here. Sometimes our bikes weigh A LOT. There is nothing wrong with getting off the bike to park. Sometimes it's easier and faster. I always park my bike like this if it's there's any kind of incline/slope. Why fight gravity? I've learned to back up with one foot and it works quite well for me :)

Old Schuberth Fans, C2 vs. C3

Have an old C2 and not sure why you should upgrade to the new C3? Check out this overview comparing the 2 models and what you might be missing out on! Schuberth C2 to C3 upgrades

Racer Gloves and the IMS Long Beach, December 2013

Yay! Another opportunity to see you and talk about gear. I'll be at the Long Beach IMS during the first weekend in December. I'm looking forward to helping you find a killer pair of motorcycle gloves. So come by and say HI! http://www.racerglovesusa.com

To grab a discount, follow this link to Sportbikes Inc Magazine. Hi Allan!

Pinlock Visors and Schuberth Helmets

As you might remember, I recently had the opportunity to ride a BMW in Ireland for a day. It was an interesting mix of fun, adventure and rain. Lots of rain!

Unfortunately I had an issue with my Schuberth leaking and my Pinlock lens not cooperating. Luckily I went to visit my friends at Schuberth N.A. at their headquarters in Southern California. Whenever you invest in a high end, premium helmet, they typically offer a level of customer service that you may not be able to find with an entry level one.

Schuberth is no different. Their office is like a small startup, an informal, casual atmosphere but a level of professionalism and customer service that is defined by an elite crew of team members.

The issue I had with my helmet was that the seal between the face shield and the helmet was broken so I was getting wet! I knew this wasn't normal and certainly there had to be an explanation. Phil, one of their customer service technicians took my helmet away so quickly to fix it, I wasn't able to take a picture of the problem. (Thanks Phil!)

Basically there was a visible bubble along the seal, definitely not normal. Above and to the left of where it says Schuberth along the left cheek.

He also noticed my Pinlock lens wasn't seated correctly. If you have one, then you may or may not know that it might need adjustment every now and then especially if the visor stops working. I don't know why it didn't occur to me to do that with this one, because I've had to do that many times with other Pinlock enabled helmets I've had. If the pins become too loose or too tight, then your visor won't seal correctly and it can separate from the visor. There should never be space between the Pinlock lens and the face shield. If you can visibly see fog or air between, then you need to readjust the pins. (or it might be the wrong model # for that helmet, which I've also encountered).

Follow this link for instructions on removing and adjusting the tension on your Pinlock.

Up to this trip, I had never experienced these issues riding in the rain/wind. It makes sense that over time the pins may become too loose. Or you may have tightened them by accident, since it can be difficult to see the tiny arrows on the pins.

If your helmet stops working the way it was supposed to, bring those issue(s) to the attention of your manufacturer. If you have an issue, go back to the store you purchased it from and tell them what's going on. If they can't help you directly, they should be able to refer you directly to them.

My plan was to ultimately have a podcast of our conversation recorded for you to download. Unfortunately, my laptop decided to quit working on me (logic board fail!) right before I needed to press record. So we'll be circling back to try this again real soon.